What framers need
A framer is trusted with things that matter to the customer: photographs, original artwork, prints, certificates and keepsakes. Mounting has to be secure, flat and clean, and it must not harm the piece over time. That rules out adhesives that yellow, contain acid or need heat that could damage a delicate print. Framers also need to work quickly at the bench, without fumes or mess. Pluss has supplied framers for over 20 years.
Rollataq: cold, acid-free mounting
Rollataq, the Daige adhesive system introduced to the UK by Pluss in 1994, is widely used in framing. It applies a clear, micro-thin coat of cold, water-soluble EVA adhesive that is:
- acid-free and non-yellowing;
- odourless and non-toxic;
- unaffected by heat, humidity or ageing;
- waterproof once dry, and easy to clean up.
For around three minutes the piece can be repositioned, so you can square it up on the board. Burnish it and the bond becomes permanent; it dries permanent in around 15 minutes.
The motorised 1200, 2400 and 3600 Desktop models (12″, 24″ and 36″) coat an A4 sheet in about three seconds and handle material as small as 2″x2″. The factory-set roller gap keeps adhesive off the image side. For smaller workshops or occasional jobs, the 300 Handheld applies a 2¼” strip. See using Rollataq and adhesive refills.
Xyron for quick, clean jobs
A Xyron applies adhesive with a turn of the handle and no electricity or heat. Acid-free permanent adhesive is available for framing, and the Xyron 2500 handles A1 work from rolls on media up to 4mm thick. See Xyron consumables and choosing a Xyron cartridge.
Finishing canvas
Canvas prints are often framed without glass, so the surface needs protecting. Liquid laminate for canvas is flexible and will not crack when stretched, and is resistant to abrasion and water. ClearShield Type C is formulated for canvas, with UV inhibitors and a non-yellowing finish, and ClearJet Fine Art suits water-based inks. It can be applied by hand or roller. Read applying liquid laminate and protecting prints.
Printing in-house
If you offer printing alongside framing, PremierArt fine art papers and canvas give a gallery finish. See fine art paper vs canvas.
Why framers choose Pluss
- Acid-free, non-yellowing adhesives
- Cold process: no heat near delicate prints
- Repositionable for careful alignment
- Odourless and non-toxic at the bench
- Flexible canvas finishes that will not crack
For current pricing and refill availability, call 01252 624411 or email sales@landoruk.com.