About Rollataq
Rollataq is the Daige adhesive system, introduced to the UK by Pluss in 1994. It applies a clear, micro-thin coat of cold, water-soluble EVA adhesive. The adhesive is odourless, non-toxic, acid-free and non-yellowing, waterproof once dry and unaffected by heat, humidity or ageing. That combination has made it a favourite in photography, picture framing and medical illustration.
Choose your model
- Rollataq 300 Handheld: a 2¼” strip, ideal for photos, artwork, presentations, rubber stamping and scrapbooking.
- Desktop models 1200, 2400 and 3600: 12″, 24″ and 36″ wide, motorised, coat an A4 sheet in around three seconds and handle material as small as 2″ x 2″.
- High production labelling machines for plain paper labels.
Step by step: desktop models
- Prepare. Make sure the machine has adhesive loaded (see adhesive refills) and the rollers are clean. Have your mounting board ready and dust-free.
- Feed the item in. Follow the orientation shown in your machine’s instructions. The motorised rollers draw it through and coat the back. The factory-set roller gap keeps adhesive off the image side, so there is no need to adjust anything.
- Position. Place the coated item on your board. You have up to about three minutes to slide it into exactly the right place.
- Burnish. Once positioned, burnish firmly with a roller or a clean cloth over a protective sheet, working from the centre outwards. This creates the permanent bond.
- Leave to dry. The adhesive dries permanent in about 15 minutes. Avoid handling or stacking the work until then.
Step by step: 300 Handheld
- Lay the item face down on a clean sheet of scrap paper.
- Roll the applicator across the back in straight, slightly overlapping strips until it is evenly covered.
- Lift the item, position it and burnish as above.
Tip: Use the repositioning window, but do not rely on it for too long. Have your board marked up before you coat, so you can place the item straight away and spend the time on fine adjustment, not measuring.
Why it works well
| Feature | What it means for you |
|---|---|
| Cold application | No heat, so safe for heat-sensitive photos and prints |
| Repositionable for up to ~3 minutes | Time to get alignment right |
| Micro-thin, clear coat | No texture showing through thin papers |
| Acid-free, non-yellowing | Suitable for work that needs to last |
| Water-soluble, odourless, non-toxic | Easy to clean, no fumes, no spray booth |
Cleaning
Because the adhesive is water-soluble, rollers and surfaces clean up easily with water before it dries. Wipe down after each session, and follow the cleaning instructions supplied with your machine. Labelling machines need only monthly cleaning.
Comparing methods? Read mounting without spray adhesive. Rollataq is widely used by photographers and picture framers.
Questions?
For model advice, refills, pricing and availability, call 01252 624411 or email sales@landoruk.com.