Protection that moves with the graphic
Vehicle wraps, banners and curtain-side graphics live hard lives. They flex, stretch over curves, flap in the wind, get washed, and sit in the sun and rain for months at a time. A protective layer has to keep up with all of that without cracking, lifting or yellowing. Liquid laminates are applied as a coating rather than a film, so they follow the contours of the surface and flex with the material underneath.
Pluss is the exclusive UK and mainland Europe distributor of the Marabu liquid laminate range (ClearStar), which includes products specifically for vehicle and outdoor graphics.
ClearShield VG for vehicle graphics
ClearShield VG is the ClearShield variant designed for vehicle graphics. Like all ClearShield products it contains UV inhibitors, is non-yellowing, exterior durable and flexible. The ClearShield range comes in matt, satin, semi-gloss and gloss; please call to confirm which finishes are currently available in VG.
Other options in the range
- ClearShield Original and Type LL are also part of the ClearShield family. Tell us about your media and job and we will advise which ClearShield variant suits it best.
- ClearJet is formulated for water-based and water-sensitive inks and can be used on vinyl, banners, fibreglass, wood, metal, plastic and paper. It comes in gloss, semi-gloss and low gloss, in aerosol, litre and gallon sizes.
- ClearShield Anti-Graffiti is a two-component, water-based coating for graphics that may be targeted by vandals.
Applications
- Vehicle wraps on vans, cars and fleet vehicles.
- Trucks and curtain sides, where the graphic has to flex as the curtain is opened and closed.
- Banners for events, construction sites and shopfronts.
- Self-adhesive vinyl graphics and signage.
Why liquid rather than film?
| Liquid laminate | Film laminate | |
|---|---|---|
| Application | By hand or roller; machine only for heavy use | Laminating machine usually required |
| Flexibility | Flexible coating, will not crack | Can crease or lift on tight curves |
| Resistance | Abrasion, water and chemical resistant | Depends on the film |
| Waste | Less waste | Trim and offcuts |
| Very large or awkward items | Coat in place or in sections | Limited by laminator width |
Before you start, read our guide to applying liquid laminate and download the liquid lamination handbook above.
Good practice
As general advice, make sure prints are fully dried or outgassed before coating, work in a clean, dust-free area, apply in even coats, and test on an offcut of the same media and ink before committing to a full wrap or banner. Our guide to protecting prints covers the wider choices.
Who uses it
Vehicle and banner coatings are used by sign makers, vehicle graphics installers, retail and PoS producers and exhibition contractors. See every liquid lamination application or return to the liquid lamination overview.
Get advice
For current pricing, sizes and availability, call 01252 624411 or email sales@landoruk.com.