Call 01252 624411 Email sales@landoruk.com

Plain paper copier & laser films

Films for plain paper copiers and laser printers, supplied by Pluss alongside our wider small-format and wide-format digital media range.

Films for copiers and laser printers

Pluss supplies films for plain paper copiers and laser printers as part of our digital media range. Whether you produce overhead-style transparencies, overlays, presentation pieces or display work, the right film makes the difference between a crisp, clean result and a sheet that smears, curls or jams.

Copier and laser films sit alongside our colour copier films, films for HP Indigo presses and small-format inkjet media, so you can source the media for your office, studio or print room from one supplier.

Why use a dedicated copier or laser film?

Copiers and laser printers fuse toner onto the page using heat and pressure. A film made for this process is designed to cope with the fuser and to accept toner properly. Using a film intended for another process – an inkjet film, for example – in a laser device can cause poor toner adhesion and, in the worst case, damage to the machine. As a general rule:

  • Choose a film made for your print process (copier/laser toner, inkjet, or digital press).
  • Check your machine manufacturer’s guidance on film and media handling.
  • Feed one sheet at a time if your device recommends it for special media.
  • Store film flat, in its packaging, away from heat and humidity.

If you are unsure which film suits your device, tell us the make and model and what you are producing, and we will point you in the right direction.

Finishing your film output

Printed films are often the start of a job rather than the end. Pluss has decades of experience in mounting and finishing, so we can help with the next step too:

  • Metallic effects – Omnicrom foil transfer works with photocopied or laser-printed toner images, and can be applied to Pluss self-adhesive film.
  • Adhesive and lamination without spray – the Xyron range applies adhesive, laminate or both in one pass with no heat or electricity.
  • Cold mounting – Rollataq cold adhesive systems coat artwork and prints without heat.

Sizes, pack quantities and pricing

Our range changes as manufacturers update their products, so rather than list figures that may go out of date, please call the team for current sizes, pack quantities, pricing and availability. You can also browse our other digital media pages, or download product information from our downloads library.

Not sure which film to choose? Our team can talk you through the options for your machine and application.

Related pages

Call us on 01252 624411 or email sales@landoruk.com for advice, current pricing and to place an order.